Gépészet | Gépjárművek » M.E.C Timing Polyurethane Belts, Belts in Polyurethane

M.EC TIMING POLYURETHANE-BELTS Belts in Polyurethane PRICE LIST S.pA You can always find a solution, whatever the question! 2 Products For more than 30 years A Zeta Gomma, in the heart of the ceramic district of Sassuolo, has been an invaluable reference point for the most diverse productive sectors ranging from big industry to small businesses. This company, a European leader in the distribution of transmission belts, notched and thermo-weldable belts and all types of conveyor belts, stands out for its exceptional versatility and quick response service, with more than 60,000 items in stock, ensuring that every need can be promptly satisfied. The new facility, in Via Radici in Piano, extends across a covered surface area of ten thousand square metres. The company has grown steadily since it was founded in 1973, by strengthening its leadership in Italy, where it can count on more than 3,000 customers. Furthermore, it is in constant expansion paying increasing attention

to overseas markets which today represent more than 20 % of its turnover. Its jewel in the crown and most prestigious business card is its own exclusive trademark M.EC V BELT which is now present all over the world 3 M.EC Timing Polyurethane Belt The M.EC TIMING POLYURETHANE BELT are made of polyurethane with high resistance steel or Kevlar inserts. The combination of these quality materials allows the manufacture of timing belts which are precise in terms of dimensions and pitch. The belts can be supplied openended, sleeve cut or produced using FLEX technology (special development without any joints). Technical Characteristics Rolled polyurethane timing belts are used in transmissions where products with limited tolerance and abrasion and oil resistance are required, with even profile (thickness, metal insert positioning, notch shape) and good flexibility. - L- H 4 CHARACTERISTICS OF THE M.EC TIMING POLYURETHANE BELT M.EC TIMING POLYURETHANE BELT is a registered trademark

This trademark stands out for the particularly sophisticated transmission belts such as polyurethane timing belts which at present, represent the latest generation of positive belts. Their particular structure and the materials used offer avant- garde performances of transmissible power and dimensional precision. Mechanical Characteristics Physical Characteristics • Consistent dimensions • Noiseless • High flexibility • High resistance steel or kevlar reinforcement with little stretching and flexible coating • Linear speed up to 80 mt/sec. • Extremely reduced transmission dimensions • Low pre-tension • Consistent length • High abrasion resistance • Resistant to agents, water, UVA rays, ozone • Working temperature: -35°/ +85° C with peaks up to 110° C • High resistance to oils, greases and gasoline • Acid-proof and alkali-proof M.EC TIMING POLYURETHANE BELT belts comply with standards ISO 5296-1 and DIN7721-1 INDEX M.EC TIMING POLMETRIC BELT

Synchronous timing belts in polyurethane “T2,5 - T5 - T10” page 6 Synchronous timing sleeves in polyurethane “T2,5 - T5 - T10” page 9 Synchronous timing belts in polyurethane “AT5 - AT10” page 11 Synchronous timing sleeves in polyurethane “AT5 - AT10” page 12 Double-sided continuous timing belts “T5 - T10” page 13 Double-sided sleeves “T5 - T10” page 14 Polyurethane belts with metal inserts XL - L - H page 15 Timing Sleeves pitch XL - L - H page 17 Polyurethane belts with metal inserts 3M - 5M - HTD page 18 M.EC TIMING POLMETRIC BELT Open ended Pitch T5 - T10 - T20 - AT5 - AT10 - AT20 page 19 M.EC TIMING Open ended Pitch XL - L - H page 22 Pitch HTD - 5 - 8 - 14M page 24 HOT JOINTS For belts with metric pitch and pitch in inches page 26 BLOCKAGE PLATES Pitch XL - L - H page 26 Pitch HTD - 5 - 8 - 14 M page 27 Profile AT5 - AT10 - T5 - T10 page 27 M.EC FLEX For belts with metric pitch and pitch in inches page

28 M.EC SPLICING MACHINE For belts with metric pitch and pitch in inches page 30 M.EC TIMING POLMETRIC BELT DD M.EC TIMING POLMETRIC Prices in red indicate that the material is available ex stock Prices in black indicate material which requires sales conditions to be defined on a case by case basis. 5 M.EC TIMING POLMETRIC BELT with synchronous continuous belt in polyurethane for industrial transmissions Timing belts in polyurethane are used in transmissions where products of limited tolerance and particular characteristics are required. Their main characteristics are as follows: resistance to friction and oil, evenness of profile (thickness, positioning of metal insert, notch shape), good flexibility. Doublesided continuous belts (type T2,5 - T5 - T10 - AT5 - AT10) are produced with steel or Kevlar cord. Profile dimensions Type T2.5 T5 T10 AT 5 AT 10 P mm 2.5 5 10 5 10 H1 mm 1.3 2.2 4.5 2.7 4.5 H2 mm 0.7 1.2 2.5 1.2 2.5 6 M.EC TIMING

POLMETRIC BELT TYPE “T2.5” Type and length in mm No. of notches 4 mm €/pc. 6 mm €/pc. TYPE “T5” 8 mm €/pc. 10 mm €/pc. 12 mm €/pc. Type and length in mm No. of notches 8 mm €/pc. 10 mm €/pc. 12 mm €/pc. 16 mm €/pc. 25 mm €/pc. 2.5T 120 48 10.70 15.40 19.70 23.60 27.00 5T 165 33 9.70 11.60 13.90 18.60 29.00 2.5T 145 58 10.70 15.40 19.80 23.60 27.00 5T 185 37 9.70 11.60 13.90 18.60 29.00 2.5T 160 64 10.70 15.40 19.80 23.60 27.10 5T 200 40 9.70 11.60 13.90 18.60 29.00 2.5T 177,5 71 10.70 15.40 19.80 23.60 27.10 5T 215 43 9.70 12.00 14.40 19.30 30.00 2.5T 200 80 10.70 15.40 19.80 23.70 27.10 5T 220 44 9.70 12.00 14.40 19.30 30.00 2.5T 230 92 10.70 15.40 19.80 23.70 27.10 5T 225 45 9.70 12.00 14.40 19.30 30.00 2.5T 245 98 10.70 15.50 19.90 23.70 27.10 5T 245 49 10.00 12.70 15.20 20.10 31.50 2.5T 265 106 10.90 15.70 20.20 24.20 27.60 5T 255

51 10.30 12.90 15.50 20.60 32.10 2.5T 285 114 11.10 15.80 20.40 24.30 27.80 5T 260 52 10.30 12.90 15.50 20.60 32.10 2.5T 290 116 11.40 16.50 21.20 25.40 29.20 5T 270 54 10.30 12.90 15.50 20.60 32.10 2.5T 305• 122 11.50 16.60 21.20 25.40 29.30 5T 280 56 10.50 13.00 15.60 20.80 32.40 2.5T 317,5 127 11.50 16.60 21.30 25.50 29.30 5T 295 59 10.50 13.00 15.60 20.80 32.40 2.5T 330 132 11.50 16.70 21.30 25.50 29.40 5T 300• 60 10.50 13.00 15.60 20.80 32.40 2.5T 380 152 12.10 17.70 22.50 26.90 30.90 5T 305 61 10.50 13.00 15.60 20.80 32.40 2.5T 420 168 12.80 18.50 23.60 28.20 32.40 5T 330 66 11.20 13.90 16.60 22.30 34.60 2.5T 480 192 13.10 18.90 24.30 29.20 33.50 5T 340 68 11.20 13.90 16.60 22.30 34.60 2.5T 500 200 13.60 19.60 24.90 29.70 34.30 5T 350 70 11.30 14.00 16.80 22.50 34.90 2.5T 600 240 16.00 23.20 29.60 35.50 40.70 5T 355 71 11.30 14.00

16.80 22.50 34.90 2.5T 620• 248 16.40 23.60 31.60 36.20 41.50 5T 365 73 11.30 14.00 16.80 22.50 34.90 2.5T 650 260 17.20 24.80 31.80 38.00 43.70 5T 390 78 11.30 14.00 16.80 22.50 34.90 2.5T 780• 312 18.10 26.30 33.50 40.10 46.10 5T 400 80 11.40 14.10 17.10 22.70 35.40 2.5T 880• 352 21.10 31.20 40.60 49.70 58.00 5T 410 82 11.50 14.50 17.40 23.10 36.10 2.5T 915 366 21.10 31.30 40.70 52.30 58.30 5T 420 84 11.50 14.50 17.40 23.10 36.10 2.5T 950 380 21.20 31.50 42.30 53.70 59.00 5T 445 89 11.50 14.50 17.40 23.10 36.10 2.5T 1185• 474 27.60 40.00 51.20 61.40 70.20 5T 450 90 11.90 15.00 17.90 23.90 37.10 5T 455 91 11.90 15.00 17.90 23.90 37.10 5T 475 95 12.10 15.20 18.20 24.30 37.90 5T 480 96 12.30 15.40 18.30 24.40 38.20 5T 500 100 12.90 16.00 19.30 25.60 40.00 5T 510 102 13.00 16.40 19.70 26.20 40.70 5T 525 105 13.40 16.70 20.10 26.80 41.70 5T

545 109 13.70 17.10 20.50 27.10 42.50 5T 550 110 13.80 17.20 20.60 27.40 42.70 5T 560 112 13.80 17.20 20.60 27.40 42.70 5T 575 115 14.00 17.50 21.00 27.80 43.60 5T 610 122 14.40 18.00 21.60 28.90 45.00 5T 620 124 14.50 18.20 21.80 29.10 45.30 5T 630 126 14.60 18.30 21.90 29.30 45.60 5T 650 130 15.00 18.60 22.40 29.70 46.40 5T 660 132 15.10 18.70 22.50 30.00 46.80 5T 690 138 15.30 18.90 22.80 30.30 47.50 5T 720 144 15.50 19.40 23.20 30.90 48.30 • MEASUREMENT PRODUCED UPON REQUEST WITH MINIMUM ORDER QUANTITY TO BE AGREED. 7 M.EC TIMING POLMETRIC TYPE “T5” Type and length in mm No. of notches 8 mm €/pc. 10 mm €/pc. 12 mm €/pc. TYPE “T10” 16 mm €/pc. 25 mm €/pc. Type and length in mm No. of notches 12 mm €/pc. 16 mm €/pc. 25 mm €/pc. 32 mm €/pc. 50 mm €/pc. 5T 750 150 15.70 19.80 23.70 31.60 49.30 10T 660 66 26.20 34.70 54.20 69.60 108.50 5T 780

156 16.00 20.00 24.10 32.00 49.90 10T 680• 68 26.60 35.30 55.00 70.60 110.40 5T 815 163 16.80 21.10 25.20 33.60 52.40 10T 690 69 26.80 35.70 55.80 71.80 111.30 5T 830• 166 16.80 21.10 25.20 33.60 52.40 10T 700 70 27.10 36.10 56.50 72.20 112.80 5T 840 168 16.80 21.10 25.20 33.60 52.40 10T 720 72 27.60 36.80 57.30 73.50 114.80 5T 885• 177 17.40 21.70 26.20 34.70 54.20 10T 730• 73 27.70 37.10 57.70 73.90 115.60 5T 900 180 17.40 21.70 26.20 34.70 54.20 10T 750 75 27.80 37.20 58.30 74.50 116.30 5T 940 188 18.20 23.50 27.20 36.30 56.80 10T 780 78 28.80 38.20 59.60 76.30 119.10 5T 990 198 18.20 22.70 27.20 36.30 56.80 10T 810 81 29.90 39.00 61.20 78.10 122.00 5T 1075 215 20.20 25.30 30.30 40.50 63.10 10T 840 84 30.10 40.20 62.70 80.30 125.50 5T 1100 220 20.70 26.00 31.20 41.40 64.60 10T 880 88 32.10 42.70 66.80 85.60 133.40 5T 1160• 232 23.10

28.90 34.50 46.20 71.90 10T 890 89 32.30 43.20 67.60 86.30 134.80 5T 1200• 240 23.10 28.90 34.50 46.20 71.90 10T 900 90 32.60 43.50 67.80 86.70 135.60 5T 1215 243 23.30 29.20 34.90 46.70 72.80 10T 920 92 33.20 44.30 69.20 88.60 138.40 5T 1280• 256 24.80 31.20 37.20 49.60 77.40 10T 960 96 34.50 46.00 71.80 91.70 143.40 5T 1315 263 24.80 31.20 37.20 49.60 77.40 10T 970 97 34.80 46.40 72.50 92.70 144.90 5T 1350• 270 26.40 32.80 39.40 52.50 82.10 10T 980 98 35.00 46.90 73.20 93.70 146.20 5T 1355• 271 41.30 50.30 59.30 77.60 117.90 10T 1010 101 36.00 47.90 74.90 95.80 149.80 5T 1380 276 26.40 32.80 39.40 52.50 82.10 10T 1080 108 38.20 51.00 79.60 101.80 158.80 5T 1955• 391 40.20 50.00 60.00 79.90 125.00 10T 1110 111 39.00 52.10 81.40 104.20 162.70 TYPE “T10” Type and length in mm No. 12 mm of €/pc. notches 16 mm €/pc. 25 mm €/pc. 32 mm €/pc.

50 mm €/pc. 10T 1140 114 40.10 53.60 83.50 106.90 167.00 10T 1150 115 40.40 53.80 83.80 107.20 167.80 10T 1210 121 42.30 56.50 88.30 112.80 176.30 10T 1240 124 43.20 57.40 89.90 115.10 179.70 10T 1250 125 43.60 58.00 90.80 116.00 181.20 10T 1300 130 46.60 60.20 94.10 120.60 188.30 10T 260 26 16.60 22.30 34.60 44.30 69.20 10T 1320 132 46.20 61.50 96.10 122.80 191.80 10T 340• 34 19.00 25.40 39.60 50.80 79.20 10T 1350 135 47.10 62.70 98.10 125.50 196.10 10T 370 37 19.00 25.40 39.60 50.80 79.20 10T 1390 139 48.50 64.60 100.90 129.30 201.90 10T 390• 39 19.40 25.90 40.50 51.80 80.80 10T 1400 140 49.00 65.00 101.70 130.10 203.30 10T 400 40 19.80 26.40 41.10 52.50 82.10 10T 1420 142 49.50 65.90 103.10 132.00 206.10 10T 410 41 20.00 26.60 41.40 52.90 82.70 10T 1460 146 50.90 67.80 106.00 135.60 211.70 10T 440 44 20.60 27.40 42.70 56.50 85.70 10T 1500 150

52.40 70.00 109.10 139.80 218.30 10T 480• 48 21.90 29.30 45.60 58.70 91.30 10T 1560 156 54.30 72.50 113.20 144.80 226.20 10T 500 50 21.90 29.30 45.60 58.70 91.30 10T 1610 161 56.60 75.40 117.80 150.70 235.50 10T 530 53 22.80 30.30 47.50 60.90 94.80 10T 1750 175 59.80 79.90 124.80 159.60 249.70 10T 560 56 23.60 31.50 49.00 62.60 97.70 10T 1780 178 60.00 80.10 125.20 160.30 250.40 10T 600 60 24.50 32.70 51.20 65.30 102.10 10T 1880 188 65.10 86.70 135.60 173.50 270.90 10T 610 61 24.60 32.80 51.40 65.70 102.60 10T 1960 196 69.70 92.70 144.90 185.50 289.60 10T 630 63 25.20 33.60 52.40 67.20 104.90 10T 2250 225 83.50 111.30 173.80 222.40 347.40 • MEASUREMENT PRODUCED UPON REQUEST WITH MINIMUM ORDER QUANTITY TO BE AGREED. 8 M.EC TIMING POLMETRIC SLEEVES TYPE “2.5” TYPE “T5” No. of notches Type and length in mm e/mm No. of notches Type and length in mm 48 2.5 T 120

2.20 33 5 T 165 58 2.5 T 145 2.20 37 64 2.5 T 160 2.20 40 TYPE “T5” No. of notches Pitch type and length in mm 1.00 132 5 T 660 1.80 5 T 185 1.00 138 5 T 690 1.80 5 T 200 1.00 144 5 T 720 1.80 e/mm e/mm 71 2.5 T 1775 2.20 43 5 T 215 1.00 150 5 T 750 1.90 80 2.5 T 200 2.20 44 5 T 220 1.00 156 5 T 780 1.90 92 2.5 T 230 2.20 45 5 T 225 1.00 163 5 T 815 1.90 98 2.5 T 245 2.20 49 5 T 245 1.00 166 5 T 830• 1.90 106 2.5 T 265 2.20 51 5 T 255 1.10 168 5 T 840 1.90 114 2.5 T 285 2.20 52 5 T 260 1.10 177 5 T 885• 2.00 116 2.5 T 290 2.30 54 5 T 270 1.10 180 5 T 900 2.00 122 2.5 T 305• 2.30 56 5 T 280 1.10 188 5 T 940 2.10 127 2.5 T 3175 2.30 59 5 T 295 1.10 198 5 T 990 2.10 132 2.5 T 330 2.30 60 5 T 300• 1.10 215 5 T 1075 2.30 152 2.5 T 380 2.40 61 5 T 305 1.10 220 5 T 1100 2.30 168 2.5 T 420 2.50 66 5 T 330 1.10 232 5 T 1160• 2.50 192 2.5 T 480

2.60 68 5 T 340 1.10 240 5 T 1200• 2.50 200 2.5 T 500 2.60 70 5 T 350 1.10 243 5 T 1215 2.50 240 2.5 T 600 3.00 71 5 T 355 1.10 256 5 T 1280• 2.70 248 2.5 T 620• 3.00 73 5 T 365 1.10 263 5 T 1315 2.70 260 2.5 T 650 3.20 78 5 T 390 1.10 270 5 T 1350• 2.80 312 2.5 T 780• 3.40 80 5 T 400 1.10 271 5 T 1355• 4.60 352 2.5 T 880• 3.70 82 5 T 410 1.20 276 5 T 1380 2.80 366 2.5 T 915 3.70 84 5 T 420 1.20 391 5 T 1955• 5.80 380 2.5 T 950 4.20 89 5 T 445 1.20 474 2.5 T 1185• 5.30 90 5 T 450 1.20 91 5 T 455 1.20 95 5 T 475 1.20 96 5 T 480 1.50 100 5 T 500 1.50 102 5 T 510 1.50 105 5 T 525 1.70 109 5 T 545 1.70 110 5 T 550 1.70 112 5 T 560 1.70 115 5 T 575 1.70 122 5 T 610 1.70 124 5 T 620 1.70 126 5 T 630 1.80 130 5 T 650 1.80 • MEASUREMENT PRODUCED UPON REQUEST WITH MINIMUM ORDER QUANTITY TO BE AGREED. 9 M.EC TIMING POLMETRIC SLEEVES TYPE “T10”

No. of notches Type and length in mm 26 10 T 260 34 37 TYPE “T10” No. of notches Type and length in mm 1.10 132 10 T 1320 3.20 10 T 340• 1.50 135 10 T 1350 3.40 10 T 370 1.50 139 10 T 1390 3.50 39 10 T 390• 2.90 140 10 T 1400 3.50 40 10 T 400 1.50 142 10 T 1420 3.50 e/mm e/mm 41 10 T 410 1.50 146 10 T 1460 3.60 44 10 T 440 1.70 150 10 T 1500 3.70 48 10 T 480• 1.70 156 10 T 1560 3.80 50 10 T 500 1.70 161 10 T 1610 4.20 53 10 T 530 1.80 175 10 T 1750 4.40 56 10 T 560 1.80 178 10 T 1780 4.40 60 10 T 600 1.90 188 10 T 1880 4.80 61 10 T 610 1.90 196 10 T 1960 5.10 63 10 T 630 1.90 225 10 T 2250 6.00 66 10 T 660 2.00 68 10 T 680• 2.00 69 10 T 690 2.00 70 10 T 700 2.10 72 10 T 720 2.10 73 10 T 730• 2.10 75 10 T 750 2.10 78 10 T 780 2.20 81 10 T 810 2.20 84 10 T 840 2.30 88 10 T 880 2.40 89 10 T 890 2.40 90 10 T 900 2.40 92 10 T 920 2.40 96 10 T 960

2.50 97 10 T 970 2.50 98 10 T 980 2.60 101 10 T 1010 2.60 108 10 T 1080 2.70 111 10 T 1110 2.80 114 10 T 1140 2.90 115 10 T 1150 2.90 121 10 T 1210 3.00 124 10 T 1240 3.10 125 10 T 1250 3.10 130 10 T 1300 3.20 • MEASUREMENT PRODUCED UPON REQUEST WITH MINIMUM ORDER QUANTITY TO BE AGREED. 10 M.EC TIMING POLMETRIC TYPE “AT5” Type and length in mm No. of notches 8 mm €/pc. 10 mm €/pc. 12 mm €/pc. TYPE “AT10” 16 mm €/pc. 25 mm €/pc. Type and length in mm No. of notches 12 mm €/pc. 16 mm €/pc. 25 mm €/pc. 32 mm €/pc. 50 mm €/pc. 5AT 225 45 9.90 12.30 14.80 19.80 30.70 10AT 500 50 26.80 35.70 55.80 71.10 111.30 5AT 255 51 10.30 12.90 15.50 20.60 32.10 10AT 560 56 27.40 36.60 57.00 73.10 114.10 5AT 280 56 10.70 13.20 16.00 21.30 33.20 10AT 600• 60 28.80 38.20 59.60 76.30 119.10 5AT 300 60 10.90 13.70 16.40 21.70 34.10 10AT 610 61 28.80 38.20 59.60

76.30 119.10 5AT 340 68 11.40 14.10 17.10 22.70 35.40 10AT 630• 63 29.80 39.5 61.60 78.80 123.10 5AT 375 75 11.90 15.00 17.90 23.90 37.10 10AT 660 68 30.40 40.70 63.60 81.40 127.00 5AT 390 78 12.10 15.20 18.20 24.30 37.90 10AT 700 70 30.70 41.00 64.00 81.70 127.70 5AT 420 84 12.40 15.50 18.60 24.60 38.60 10AT 730 73 31.40 41.50 65.00 83.20 129.80 5AT 450 90 12.90 16.10 19.40 25.80 40.40 10AT 780 78 31.90 42.50 66.40 84.90 132.70 5AT 455 91 12.90 16.10 19.40 25.80 40.40 10AT 800 80 32.60 43.50 67.80 86.70 135.60 5AT 500 100 13.40 16.70 20.10 26.80 41.70 10AT 840 84 33.70 45.00 70.30 89.90 140.60 5AT 545 109 14.10 17.70 21.10 28.10 43.90 10AT 890 89 36.80 49.20 76.80 98.20 153.50 5AT 600 120 14.80 18.50 22.30 29.60 46.10 10AT 920 92 39.50 52.80 82.40 105.70 164.90 5AT 610 122 15.00 18.60 22.40 29.70 46.40 10AT 960 96 43.10 57.20 89.40 114.50

179.10 5AT 630• 126 15.20 18.80 22.80 30.50 47.20 10AT 980 98 43.50 56.70 88.50 113.30 176.80 5AT 660 132 15.50 19.40 23.20 30.90 48.30 10AT 1000 100 72.50 96.70 150.90 193.00 177.70 5AT 710 142 16.30 20.40 24.30 32.40 50.80 10AT 1010 101 43.60 58.00 90.80 116.00 181.20 5AT 720 144 16.30 20.40 24.30 32.40 50.80 10AT 1050 105 44.90 59.80 93.60 119.70 186.80 5AT 750 150 16.60 20.70 24.90 33.10 51.80 10AT 1080 108 46.20 61.50 96.10 122.80 191.80 5AT 780 156 17.10 21.20 25.40 33.90 52.80 10AT 1100 110 48.60 64.90 101.30 129.70 202.60 5AT 825 165 17.50 21.80 26.40 34.90 54.50 10AT 1150 115 48.60 64.90 101.30 129.70 202.60 5AT 975 195 19.30 24.10 28.90 38.50 59.80 10AT 1200 120 49.90 66.80 104.20 133.30 208.30 5AT 1050 210 20.00 25.00 30.00 40.00 62.50 10AT 1210 121 50.20 67.10 104.50 133.70 208.90 5AT 1125 225 20.80 26.20 31.40 41.50 65.00 10AT 1250 125

51.30 68.30 106.60 136.40 213.30 5AT 1500 300 24.80 31.20 37.20 49.60 77.40 10AT 1280 128 52.40 70.00 109.10 139.80 218.30 5AT 2000 400 60.90 74.00 87.50 114.10 173.60 56.20 74.70 116.70 149.30 233.30 233.30 10AT 1300• 130 10AT 1320 132 56.20 74.70 116.70 149.30 10AT 1350 135 106.00 137.70 199.20 265.30 40290 10AT 1360 136 57.70 77.00 120.20 153.90 240.30 10AT 1400 140 59.20 78.80 123.10 157.50 246.00 10AT 1420 142 59.70 79.70 124.50 159.30 248.90 10AT 1480 148 61.30 81.50 127.30 163.00 254.60 10AT 1500 150 62.00 82.70 129.20 165.40 258.10 10AT 1600 160 64.20 85.60 133.40 170.80 266.80 10AT 1700 170 68.30 91.20 142.40 182.20 284.50 10AT 1720• 172 68.30 93.50 142.40 182.20 284.50 10AT 1800 180 68.30 93.50 142.40 182.20 284.50 10AT 1860 186 74.60 99.40 155.20 198.40 310.30 10AT 1940 194 80.90 111.50 168.30 215.50 336.50 • MEASUREMENT PRODUCED UPON REQUEST WITH

MINIMUM ORDER QUANTITY TO BE AGREED. 11 M.EC TIMING POLMETRIC SLEEVES TYPE “AT5” TYPE “AT10” Type and length in mm e mm No. of notches Type and length in mm e mm 45 5 AT 225 1.00 50 10 AT 500 2.00 51 5 AT 255 1.10 56 10 AT 560 2.10 56 5 AT 280 1.10 60 10 AT 600• 2.20 60 5 AT 300 1.10 61 10 AT 610 2.20 68 5 AT 340 1.10 63 10 AT 630• 2.30 75 5 AT 375 1.20 68 10 AT 660 2.30 No. of notches 78 5 AT 390 1.20 70 10 AT 700 2.30 84 5 AT 420 1.50 73 10 AT 730 2.30 90 5 AT 450 1.50 78 10 AT 780 2.40 91 5 AT 455 1.50 80 10 AT 800 2.40 100 5 AT 500 1.50 84 10 AT 840 2.50 109 5 AT 545 1.70 89 10 AT 890 2.70 120 5 AT 600 1.80 92 10 AT 920 2.80 122 5 AT 610 1.80 96 10 AT 960 3.00 127 5 AT 630• 1.80 98 10 AT 980 3.00 132 5 AT 660 1.80 100 10 AT 1000 5.20 142 5 AT 710 1.90 101 10 AT 1010 3.10 144 5 AT 720 1.90 105 10 AT 1050 3.20 150 5 AT 750 1.90 108 10 AT 1080

3.20 156 5 AT 780 2.00 110 10 AT 1100 3.50 165 5 AT 825 2.00 115 10 AT 1150 3.50 195 5 AT 975 2.20 120 10 AT 1200 3.60 210 5 AT 1050 2.20 121 10 AT 1210 3.60 225 5 AT 1125 2.30 125 10 AT 1250 3.60 300 5 AT 1500 2.70 128 10 AT 1280 3.70 400 5 AT 2000 6.60 130 10 AT 1300• 4.00 132 10 AT 1320 4.00 135 10 AT 1350 7.70 136 10 AT 1360 4.20 140 10 AT 1400 4.30 142 10 AT 1420 4.40 148 10 AT 1480 4.60 150 10 AT 1500 4.60 160 10 AT 1600 4.70 170 10 AT 1700 5.00 172 10 AT 1720• 5.00 180 10 AT 1800 5.00 186 10 AT 1860 5.40 194 10 AT 1940 5.90 • MEASUREMENT PRODUCED UPON REQUEST WITH MINIMUM ORDER QUANTITY TO BE AGREED. 12 M.EC TIMING POLMETRIC BELT DD TYPE “T5” Type and length in mm TYPE “T10” No. of notches 10 mm €/pc. 16 mm €/pc. 25 mm €/pc. Type and length in mm 410-T5-DD 82 23.60 35.60 48.50 260-T10-DD 26 41.00 61.40 112.40 460-T5-DD 92 24.70 37.40 53.70

530-T10-DD 53 48.50 72.60 132.90 515-T5-DD 103 25.90 40.40 58.60 630-T10-DD 63 51.60 77.30 141.60 590-T5-DD 118 28.60 43.30 61.90 660-T10-DD 66 51.90 77.90 142.80 620-T5-DD 124 29.50 44.60 63.60 720-T10-DD 72 54.30 81.40 149.30 750-T5-DD 150 31.80 48.20 68.60 840-T10-DD 84 62.40 93.50 171.00 815-T5-DD 163 32.40 49.40 70.10 900-T10-DD 90 67.40 105.00 200.60 860-T5-DD 172 33.90 51.30 72.80 980-T10-DD 98 80.10 119.80 220.00 940-T5-DD 188 37.40 57.00 81.20 1210-T10-DD 121 88.90 133.20 243.80 1100-T5-DD 220 41.60 63.30 90.40 1240-T10-DD 124 92.20 139.20 255.10 1250-T10-DD 125 93.50 140.40 257.30 1320-T10-DD 132 104.70 157.10 288.30 1350-T10-DD 135 106.90 160.30 293.90 1420-T10-DD 142 107.80 161.70 296.40 1610-T10-DD 161 119.80 179.90 329.50 1880-T10-DD 188 140.90 211.30 387.50 2250-T10-DD 225 151.20 232.50 464.30 T5 - DD No. of notches 16 mm €/pc. 25 mm €/pc.

50 mm €/pc. T10 - DD • MEASUREMENT PRODUCED UPON REQUEST WITH MINIMUM ORDER QUANTITY TO BE AGREED. 13 M.EC TIMING POLMETRIC DD SLEEVES TYPE “T5” Type and length in mm 410-T5-DD TYPE “T10” No. of notches e mm 82 2.00 Type and length in mm No. of notches e mm 260-T10-DD 26 2.20 460-T5-DD 92 2.10 530-T10-DD 53 2.50 515-T5-DD 103 2.30 630-T10-DD 63 2.60 590-T5-DD 118 2.40 660-T10-DD 66 2.60 620-T5-DD 124 2.40 720-T10-DD 72 2.70 750-T5-DD 150 2.60 840-T10-DD 84 3.00 815-T5-DD 163 2.60 900-T10-DD 90 3.60 860-T5-DD 172 2.70 980-T10-DD 98 4.00 940-T5-DD 188 2.90 1210-T10-DD 121 4.60 1100-T5-DD 220 3.20 1240-T10-DD 124 4.80 1250-T10-DD 125 4.80 1320-T10-DD 132 5.20 1350-T10-DD 135 5.30 1420-T10-DD 142 5.30 1610-T10-DD 161 5.90 1880-T10-DD 188 7.10 2250-T10-DD 225 8.80 • MEASUREMENT PRODUCED UPON REQUEST WITH MINIMUM ORDER QUANTITY TO BE AGREED. 14 M.EC BELTS TIMING POLMETRIC TYPE

XL 1/5” (5.08 mm) Type Type and length in mm 025 No. 6.35 mm of €/pc. notches TYPE L 3/8” (9.525 mm) 031 7.9 mm €/pc. 037 9.4 mm €/pc. Type Type and length in mm 60-XL 152.6 30 9.40 11.50 13.40 124-L 70-XL 177.8 35 9.60 11.50 13.60 150-L 80-XL 209.2 40 9.70 11.60 13.80 187-L 90-XL 228.6 45 9.70 11.90 13.90 202-L 100-XL 254 50 9.80 12.00 14.10 210-L 110-XL 279.4 55 9.90 12.60 14.20 225-L 120-XL 304.8 60 10.30 12.70 14.80 240-L 130-XL 330.2 65 10.50 13.00 15.00 255-L 647.7 134-XL 340.3 67 10.50 13.10 15.10 270-L 685.8 140-XL 355.6 70 10.80 13.10 15.50 285-L 150-XL 381 75 10.80 13.80 15.60 300-L 160-XL 406.1 80 11.30 14.00 16.10 170-XL 431.8 85 11.50 14.20 180-XL 457.2 90 11.60 14.50 190-XL 482.6 95 11.90 200-XL 508 100 12.30 210-XL 533.4 105 220-XL 558.8 110 230-XL 584.2 240-XL 609.6 250-XL 635 125 15.00 18.10 260-XL 660.4 130 15.40 18.80 290-XL

736.6 145 17.20 20.80 24.40 300-XL 762 150 17.80 21.60 25.30 356-XL 904.2 178 21.00 25.50 30.00 414-XL 1051.6 207 24.40 29.70 34.80 450-XL 1143 225 26.60 32.30 38.00 075 100 19.05 mm 254 mm €/pc. €/pc. 33 27.20 381 40 27.70 41.30 52.10 475 50 30.10 43.20 56.40 513 54 31.40 44.90 58.90 533.4 56 32.10 46.40 60.40 571.5 60 32.80 47.50 62.00 609.6 64 33.00 47.70 62.30 68 33.70 49.50 63.10 72 34.30 49.50 64.80 723.9 76 35.30 51.00 66.90 762 80 36.40 53.50 67.90 322-L 817.9 86 40.60 59.30 75.70 16.60 345-L 876.3 92 44.30 64.80 82.40 16.70 367-L 932.1 98 46.20 67.40 88.60 14.60 17.70 390-L 990.6 104 50.80 74.20 97.60 15.00 17.70 420-L 1066.8 112 54.30 79.40 101.30 12.60 15.40 18.20 450-L 1143 120 56.10 81.70 104.30 13.00 15.50 18.80 480-L 1219.2 128 56.60 83.10 109.20 115 14.00 17.20 20.20 510-L 1295.4 136 65.60 96.10 121.70 120 14.10 17.30

20.50 540-L 1371.6 144 70.00 102.20 130.40 21.60 570-L• 1447.8 152 71.90 104.90 134.00 22.40 600-L 1524 160 72.00 105.00 134.10 (XL) 1/5” 314.9 050 No. 12.7 mm of €/pc. notches (L) 3/8” 15 39.80 51.00 M.EC BELTS TIMING POLMETRIC PITCH H 1/2” (12,7 mm) Type and length in mm No. of notches 075 19.05 mm €/pc. 100 25.4 mm €/pc. 150 38.10 mm €/pc. 200 50.8 mm €/pc. 300 76.2 mm €/pc. 240-H 609.6 48 50.00 62.10 91.60 124.30 172.60 270-H 685.8 54 52.10 64.80 95.10 119.80 179.70 300-H 762 60 54.50 67.70 99.40 125.30 188.20 330-H 838.2 66 60.90 75.40 110.70 139.50 209.10 360-H 914.4 72 70.40 87.60 128.10 162.00 243.00 Type 390-H 990.6 78 75.20 99.90 147.20 185.10 277.60 420-H 1066.8 84 81.40 100.90 148.00 186.90 280.40 450-H 1143 90 83.50 103.80 152.20 192.40 288.60 480-H 1219.2 96 86.60 107.40 157.00 199.10 298.50 510-H 1295.4 102 98.30 122.00 179.00

226.10 338.90 (H) 1/2” 16 M.EC TIMING SLEEVES TYPE XL 1/5” (5,08 mm) Type and length in tenths of an inch TYPE L 3/8” (9,525 mm) No. of e /inch notches Type and length in tenths of an inch TYPE H 1/2” (12,7 mm) No. of e /inch notches Type and length in tenths of an inch No. of e /inch notches 60-XL 30 31.70 124-L 33 44.10 240-H 48 54.30 70-XL 35 31.80 150-L 40 44.80 270-H 54 56.60 80-XL 40 32.20 187-L 50 49.00 300-H 60 59.20 90-XL 45 32.60 202-L 54 51.30 330-H 66 65.80 100-XL 50 33.10 210-L 56 51.30 360-H 72 76.40 110-XL 55 33.40 225-L 60 54.10 390-H 78 87.30 120-XL 60 34.70 240-L 64 54.30 420-H 84 88.30 130-XL 65 34.90 255-L 68 54.90 450-H 90 90.90 134-XL 67 36.40 270-L 72 56.60 480-H 96 93.90 140-XL 70 36.70 285-L 76 57.40 510-H 102 106.50 150-XL 75 36.80 300-L 80 59.20 160-XL 80 38.20 322-L 86 65.80 170-XL 85 39.30 345-L 92 71.90 180-XL 90 39.40

367-L 98 78.80 190-XL 95 40.00 390-L 104 87.30 200-XL 100 41.80 420-L 112 88.30 210-XL 105 43.50 450-L 120 90.90 220-XL 110 45.00 480-L 128 98.20 230-XL 115 48.50 510-L 136 106.50 240-XL 120 48.60 540-L 144 113.50 250-XL 125 52.10 570-L• 152 116.50 260-XL 130 53.60 600-L 160 116.70 290-XL 145 59.50 300-XL 150 61.70 356-XL 178 73.20 414-XL 207 85.00 450-XL 225 92.40 17 M.EC TIMING POLMETRIC PITCH HTD 3-5M SLEEVES TYPE 3M (3 mm) TYPE 3M (3 mm) Type and length in mm No. of e /mm notches Type and length in mm TYPE 5M (5 mm) No. e /mm of notches Type and length in mm No. of e /mm notches 117-3M 39 1.80 669-3M 223 4.10 750-5M 150 168-3M 56 1.80 708-3M 236 4.40 800-5M 160 4.90 171-3M 57 1.80 750-3M 250 4.60 850-5M 170 5.20 174-3M 58 1.80 963-3M 321 5.90 950-5M 190 5.90 186-3M 62 1.80 960-5M 192 5.90 201-3M 67 1.80 975-5M 195 6.00 207-3M 69 1.80 1000-5M 200

6.20 210-3M 70 1.80 1050-5M 210 6.50 225-3M 75 1.80 1100-5M 220 6.80 237-3M 79 1.80 1110-5M 222 6.80 255-3M 85 1.80 1200-5M 240 7.40 1210-5M 242 7.50 264-3M 88 1.80 TYPE 5M (5 mm) Type and length in mm No. e /mm of notches 276-3M 92 1.80 282-3M 94 1.80 265-5M 53 286-3M 95 1.80 300-5M 291-3M 97 1.80 360-5M 300-3M 100 1.80 312-3M 104 1.90 318-3M 106 2.00 321-3M 107 2.00 330-3M 110 339-3M 113 357-3M 360-3M 363-3M 4.60 1240-5M 248 7.60 1.80 1300-5M 260 8.00 60 1.80 1350-5M 270 8.30 72 2.20 1380-5M 276 8.50 375-5M 75 2.30 1440-5M 288 8.90 400-5M 80 2.50 1470-5M 294 9.10 450-5M 90 2.80 1500-5M 300 9.20 500-5M 100 3.10 1520-5M 304 9.40 2.00 520-5M 104 3.20 1530-5M 306 9.40 2.10 535-5M 107 3.30 1540-5M 308 9.50 119 2.20 550-5M 110 3.40 1700-5M 340 10.50 120 2.20 560-5M 112 3.50 1720-5M 344 10.60 121 2.20 565-5M 113 3.50 1750-5M 350 10.80 369-3M

123 2.30 575-5M 115 3.50 1760-5M 352 10.90 375-3M 125 2.30 580-5M 116 3.60 1780-5M 356 11.00 384-3M 128 2.40 600-5M 120 3.70 1900-5M 380 11.70 390-3M 130 2.40 615-5M 123 3.80 1960-5M 392 12.10 420-3M 140 2.60 625-5M 125 3.90 2000-5M 400 12.30 435-3M 145 2.70 650-5M 130 4.00 2100-5M 420 12.90 447-3M 149 2.80 660-5M 132 4.10 2160-5M 432 13.30 486-3M 162 3.00 665-5M 133 4.10 2250-5M 450 13.90 549-3M 183 3.40 700-5M 140 4.30 2350-5M 470 14.50 570-3M 190 3.50 710-5M 142 4.40 2500-5M 500 15.40 624-3M 208 3.80 720-5M 144 4.40 633-3M 211 3.90 740-5M 148 4.60 18 M.EC TIMING POLMETRIC OPEN-ENDED BELTS Timing belts in polyurethane are used in transmissions where products of limited tolerance and particular characteristics are required . Their main characteristics are as follows: resistance to friction and oil, evenness of profile (thickness, positioning of metal insert, notch shape), good

flexibility. They are open-ended (type T5 - T10 T20 - AT5 - AT10 - AT20) Profile dimensions Type P mm T5 T10 T20 AT5 AT10 AT20 5 10 20 5 10 20 H1 mm 2.2 4.5 8 2.7 4.5 9 H2 mm 1.2 2.5 5 1.2 2.5 5 BELT TYPE Width mm T5 e /metre 10 15.10 T10 e /metre T20 e /metre AT5 e /metre AT10 e /metre AT20 e /metre 17.10 16 29.10 17.30 25 33.10 27.00 50.10 32 42.40 33.50 64.30 51.90 54.30 72.30 50 63.10 49.80 91.50 73.60 62.20 105.00 75 74.80 137.10 93.40 157.60 100 95.00 174.10 113.20 200.00 185.10 299.90 150 33.80 39.50 38.70 42.40 56.60 The prices indicated above apply to rolls of 50 meters. A 10% supplement is added to smaller quantities. 19 TECHNICAL SHEET FOR M.EC TIMING POLMETRIC OPEN-ENDED BELTS BELTS WITH METRIC PITCH T5 Note: Minimum Pulley Z10 Pitch mm Belt width mm 6 10 16 25 5 32 50 75 100 Maximum drive load (open belt) N 200 320 540 900 1150 1860 2820 3780 Maximum drive load (jointed

belt) N - 160 270 450 575 930 1410 1890 Maximum load breaking point with open belt N 900 1250 2125 3500 4500 7250 11000 14750 T10 Note: Minimum Pulley Z12 Pitch mm 10 Belt width mm 12 16 25 32 50 75 100 150 Maximum drive load (open belt) N 1150 1610 2650 3450 5520 8400 11270 17020 Maximum drive load (jointed belt) N - 805 1325 1725 2760 4200 5635 8510 Maximum load breaking point with open belt N 4200 5880 9660 12600 20160 30660 41160 62160 T20 Note: Minimum Pulley Z15 Pitch mm 20 Belt width mm 25 32 50 75 100 150 Maximum drive load (open belt) N 4170 5390 8580 12990 17400 25480 Maximum drive load (jointed belt) N 2085 2695 4290 6495 8700 12740 Maximum load breaking point with open belt N 16150 20900 33250 50350 67450 98800 20 TECHNICAL SHEET FOR M.EC TIMING POLMETRIC OPEN-ENDED BELTS BELTS WITH METRIC PITCH AT5 Note: Minimum Pulley Z10 Pitch mm Belt width mm 10 16 25 5 32 50

75 Maximum drive load (open belt) N 640 1120 1840 2400 3840 5840 Maximum drive load (jointed belt) N 320 560 920 1200 1920 2920 Maximum load breaking point with open belt N 2160 3750 6210 8100 12960 19710 AT10 Note: Minimum Pulley Z15 Pitch mm 10 Belt width mm 16 25 32 50 75 100 150 Maximum drive load (open belt) N 2450 4170 5390 8580 12990 17400 26220 Maximum drive load (jointed belt) N 1225 2085 2695 4290 6495 8700 13110 Maximum load breaking point with open belt N 9500 16150 20900 33250 50350 67450 101650 AT20 Note: Minimum Pulley Z18 Pitch mm 20 Belt width mm 25 32 50 75 100 150 Maximum drive load (open belt) N 5280 7200 11520 17280 23520 35520 Maximum drive load (jointed belt) N 2640 3600 5760 8640 11760 17760 Maximum load breaking point with open belt N 19250 26250 42000 63000 85750 129500 Note: The above mentioned performance refers to belts with steel cable. 21 M.EC TIMING

POLMETRIC POLYURETHANE OPEN-ENDED BELTS XL - L- H with metal insert M.EC TIMING POLMETRIC (POLYURETHANE) OPEN-ENDED BELTS XL-L-H TYPE XL Pitch 1/5” (5.08 mm) Length in inches M.EC Timing polyurethane belts, pitch XL-L - H with metal insert are used in low power transmissions where products with limited tolerance are required (for example, horizontal and vertical automatic doors). Their main characteristics are as follows: resistance to friction and oil, evenness of profile (thickness, positioning of metal insert, notch shape), good flexibility. Width mm e /meter 0.25 6.35 14.90 0.37 9.53 16.30 •0.50 12.70 24.20 0.75 19.05 40.90 100 25.40 52.20 200 50.80 104.20 400 101.60 208.70 TYPE L Pitch 3/8” (9,52 mm) Length in inches Width mm e /meter •0.37 9.53 8.80 0.50 12.70 17.60 •0.75 19.05 26.40 100 25.40 35.30 150 38.10 52.80 200 50.80 70.40 400 101.60 140.70 TYPE H Pitch 1/2” (12,7 mm) Length in inches Width mm e /meter 0.50

12.70 12.50 0.75 19.05 20.00 100 25.40 24.90 150 38.00 37.40 200 50.20 47.60 300 76.20 74.90 400 101.60 98.40 • Production upon request. Minimum supply 50 m. There is a 10% supplement for smaller quantities. 22 MAXIMUM WORKING LOADS FOR ME.C OPEN-ENDED TIMING POLMETRIC 1/5” (XL) Note: Minimum Pulley Z10 Pitch mm/inch 5.08 = 1/5” Belt width mm Inch-Cod. 6.4 025 7.9 031 9.5 037 12.7 050 19.1 075 25.4 100 50.8 200 Maximum drive load (open belt) N 190 220 290 420 670 900 1890 Maximum drive load (jointed belt) N 95 110 145 210 335 450 945 Maximum load breaking point with open belt N 750 875 1125 1625 2625 3500 7375 3/8” (L) Note: Minimum Pulley Z12 Pitch mm/inch 9.525 = 3/8” Belt width mm Inch-Cod. 12.7 050 19.1 075 25.4 100 38.1 150 50.8 200 Maximum drive load (open belt) N 1270 1960 2760 4140 5640 Maximum drive load (jointed belt) N 635 980 1380 2070 2820 Maximum load breaking point with

open belt N 4620 7140 10080 15120 20580 1/2” (H) Note: Minimum Pulley Z14 Pitch mm/inch 12.7 = 1/2” Belt width mm Inch-Cod. 12.7 050 19.1 075 25.4 100 38.1 150 50.8 200 76.2 300 101.6 400 Maximum drive load (open belt) N 1270 1960 2760 4140 5640 8510 11390 Maximum drive load (jointed belt) N 635 980 1380 2070 2820 4255 5695 Maximum load breaking point with open belt N 4620 7140 10080 15120 20580 31080 41580 23 M.EC TIMING POLMETRIC POLYURETHANE OPENENDED BELTS 5-8-14M HTD with metal insert M.EC TIMING POLYURETHANE OPEN-ENDED BELTS HTD TYPE 5M HTD Width mm M.EC Timing polyurethane belts, pitch 5-814M HTD with metal insert are used in low power transmissions where products with limited tolerance are required (for example, horizontal and vertical automatic doors). Their main characteristics are as follows: resistance to friction and oil, evenness of profile (thickness, positioning of metal insert, notch shape), good flexibility. e

/meter 10 17.20 15 28.50 25 42.60 50 75.00 100 137.10 TYPE 8M HTD Width mm e /meter 10 11.30 15 18.70 20 22.60 30 37.40 50 56.10 85 95.50 100 112.20 TYPE 14M HTD Width mm e /meter 40 91.40 •55 •85 128.00 100 352.60 115 352.60 211.20 • Production upon request. Minimum order quantity 50 m. There is a 10% supplement for smaller quantities. 24 TECHNICAL SHEET FOR M.EC TIMING POLYURETHANE OPEN ENDED 5 - 8 - 14M HTD HTD 5M Note: Minimum Pulley Z12 Pitch mm 5 Belt width mm 10 15 25 50 Maximum drive load (open belt) N 920 1500 2650 5520 Maximum drive load (jointed belt) N 460 750 1325 2760 Maximum load breaking point with open belt N 3360 5460 9660 20160 HTD 8M Note: Minimum Pulley Z18 Pitch mm 8 Belt width mm 10 15 20 30 50 85 100 Maximum drive load (open belt) N 1470 2210 3190 4900 8580 14700 17400 Maximum drive load (jointed belt) N 735 1105 1595 2450 4290 7350 8700 Maximum load

breaking point with open belt N 5700 8550 12350 19000 32250 57000 67450 HTD 14M Note: Minimum Pulley Z25 Pitch mm Belt width mm 25 40 14 55 85 115 Maximum drive load (open belt) N 5250 9120 12480 19680 26880 Maximum drive load (jointed belt) N 2640 4560 6240 9840 13440 Maximum load breaking point with open belt N 19250 33250 45500 71750 98000 Note: The above mentioned performance refers to belts with steel cable. 25 HOT JOINTS FOR BELTS WITH METRIC PITCH, AND BELTS WITH PITCH IN INCHES Width mm e/pc. Width mm e/pc. 16 76.20 0.50 76.40 25 114.60 0.75 114.60 32 139.80 100 114.60 50 210.50 150 139.80 75 327.30 200 210.50 100 378.80 300 327.30 150 588.60 400 378.80 PLATES FOR BELTS WITH PITCH IN INCHES XL H L e/pc. Width in inches XL 19.20 XL 20.50 XL upon request 0.50 XL upon request 0.75 XL upon request 100 L XL upon request 200 L Profile Width in inches Profile upon request 0.37

26.30 0.50 L 29.20 0.75 L 32.90 100 upon request 150 upon request 200 Profile e/pc. 0.25 L 0.37 L 26 e/pc. Width in inches H 32.10 0.50 H 33.60 0.75 H 35.00 100 H upon request 150 H upon request 200 H upon request 300 H upon request 400 PLATES FOR BELTS WITH METRIC PITCH AT 5 5 M Width in inches Profile e/pc. upon request 6 5M upon request 5 24.10 10 5M 21.20 10 25.50 16 5M 21.80 15 26.30 25 5M 28.60 25 AT 5 upon request 32 5M upon request 50 AT 5 upon request 50 Profile e/pc. AT 5 AT 5 AT 5 AT 5 AT 10 Width in inches 8 M Profile e/pc. Width in inches Profile e/pc. Width in inches AT 10 32.90 16 8M upon request 10 AT 10 38.00 25 8M 27.80 20 AT 10 42.30 32 8M 28.60 30 AT 10 43.80 50 8M 32.10 50 AT 10 upon request 75 8M 49.00 85 AT 10 upon request 100 8M upon request 100 T 5 14 M Width in inches Profile e/pc. Width in inches upon request 6 14 M upon

request 25 20.50 10 14 M 68.50 40 21.20 16 14 M 74.50 55 21.80 25 14 M 83.90 85 T5 upon request 32 14 M 99.30 100 T5 upon request 50 Profile e/pc. Width in inches T 10 27.80 16 T 10 31.60 25 T 10 32.90 32 Profile e/pc. T5 T5 T5 T5 T 10 T 10 upon request 75 T 10 upon request 100 27 M.EC FLEX Polyurethane high torque timing belts are used in transmissions where products with limited tolerance and abrasion and oil resistance are required, with even profile (thickness, metal insert positioning, notch shape) and good flexibility. The M.EC FLEX belts, with special length, embody all the best characteristics of polyurethane belts. Furthermore, the internal cord in steel or kevlar is the best solution for meeting the requirements of the highest operating stress conditions. Using special processes, the internal cord can also be in stainless steel for operations which involve contact with water or oxidizing liquids. FLEX belts can also be

manufactured applying a fibreglass cloth both on the internal diameter of the belt (PAZ) and on back of the belt (PAR). FLEX PAZ: with the notch covered in order to improve meshing with the pulley and to obtain better sound proof levels. FLEX PAR: the belt is covered on the back in order to reduce friction with the external surface. 28 SPECIAL BELTS AND APPLICATIONS Polyurethane belts of special length can be made, with ring closure using a hot vulcanization procedure on the required length of openended belts. However, it should be remembered during the design stage that jointed belts have approximately 50% of the load capacity of the original belt. Coatings can be applied on the back of belts in polyurethane or other materials including para rubber, rubber, linatex, etc. by means of vulcanisation. The polyurethane coatings can be moulded, if a die is available, or hot vulcanized with moulds produced on machine tools. EXAMPLE OF APPLICATIONS For special belts or particular

applications, please ask for a quotation. 29 M.EC SPLICING MACHINE A Zeta Gomma’s strategy has always been aimed at ensuring that high quality products are immediately available. These objectives are reached through the company maintaining a vast stock which together with the various service levels, makes these products available to our clients when and where they are needed. In light of this strategy, together with the efficient assistance and assembly service, the R&D department of A Zeta Gomma has developed a series of technologically advanced equipment that has culminated in the MEC WELDER (automatic welder for MEC POLBELT belts) and the most recent innovation, the MEC SPLICING MACHINE, a unique tool which allows a complete joint cycle to be carried out for any type of timing belt in PU. MEC SPLICING MACHINE is an integrated system of pressing and punching which assists the operator during all stages which are required for the correct execution of the splicing. JOINT

WARRANTY the success of joints is always guaranteed if only MEC TIMING BELTS are used. This is due to the fact that all the procedures and parameters supplied with the press have been specially designed on the polyurethane used in the production of MEC TIMING belts. If other materials are used, A ZETA GOMMA declines all liability for the poor success of the joint. QUICK JOINT The high level of automation of the mec splicing machine, in both the welding and cooling stages, allows numerous consecutive joints as the user does not have to wait for cooling since the machine is equipped with its own cooling system 30 Execution stages for a correct joint in the polyurethane timing belt PUNCHING TECHNIQUE Through the designated die, incorporated into the tool, the belt is cut into the classic square shape. Pressure is exerted through a cylinder actuated manually by the operator. WELDING The ends of the belt are inserted into a splicing mould, which can vary depending on the different

pitch, and will then be placed into the press. The pressure required for correct welding will be applied according to the splicing table while a digital manometer will help the operator apply the right force to the cylinder. The MEC SPLICING MACHINE is equipped with an electrical panel which independently controls the individual platens so that the correct splicing temperatures can be set. COOLING The MEC SPLICING MACHINE is supplied complete with an automatic water cooling system. This cooling system is vital in ensuring the success of the joint, It is controlled by the electrical panel which activates the automatic start up of the cooling operation once the set temperature is reached. The highly automated MEC SPLICING MACHINE, both in the welding and cooling phases, allows numerous consecutive joints to be made without the continuous presence of the operator, who in the meantime, can perform other tasks, thus saving time and costs. This project is intended for. DISTRIBUTORS, who

want to provide their clients with an ever more rapid and efficient service MANUFACTURERS, who want to become more flexible in production USERS, who want to become independent from third parties so as to improve efficiency EXCERPT FROM GENERAL TERMS AND CONDITIONS All customer orders are subject to the General Terms and Conditions of Sale, the provisions of which will apply to all supplies unless agreed otherwise by the parties, and must be set out in writing failing which they will be invalid. The agreed provisions must also be stated on the order and order confirmation form. Some of the important provisions of the Terms and Conditions are set out below (for the full document see www.azetagommacom) The buyer is defined as the “Buyer” and A Zeta Gomma F.I spa is defined as the “Seller” or “Supplier” PRICES: Unless agreed otherwise in writing, the sale prices in force on the date of the order and order confirmation form will apply. Returned goods must be sent, carriage

paid, to the warehouse of A Zeta Gomma Forniture Industriali Spa, with packaging costs to be paid by the customer. COST AND RISK OF TRANSPORT: The cost and risk of transport are borne by the customer. The goods are always shipped at the sole risk of the buyer, even if (by special arrangement) the sale is agreed free to destination. TERMS OF DELIVERY: A delivery date is confirmed in writing is only considered an indication and is never binding. The seller is always exempt and excluded from any liability for any loss or claim that may derive from events caused by the early or late delivery of all or part of the supplies. Where the delay is attributable to the Seller, claims for compensation may only be made for supply contracts in which a penalty clause has been expressly agreed.The amount of compensation may never exceed the value of the supplies, under any circumstances. The customer must accept the ordered products even if the delivery is late CONFORMITY: A Zeta Gomma Forniture

Industriali Spa guarantees the conformity of all products supplied, i.e they will match the quantity, quality and type described in the contract, which is the order subsequently accepted with a valid order confirmation form. TOLERANCE: The above provisions on product conformity must allow for the usual tolerance on manufactured products. COMPLAINTS AND DEFECTS: Any non-conformities detected by the buyer must be reported promptly in writing (failing which the complaint will be invalid) in order to allow A Zeta Gomma Forniture Industriali Spa to respond quickly and/or find a rapid solution to the complaint, if valid. LIABILITY: The supplied goods must be used as intended, in accordance with the product characteristics, as no liability can be accepted for any claims caused by damage due to improper or incorrect use of the goods. RETURNS: Returned goods will not be accepted unless agreed in advance, in writing. Any requests for substitute materials will only be accepted under the following

conditions (except for verified non-conformity issues): 1) The supplied materials must be standard, with no specific construction or processing techniques or other special requirements fulfilled at the customer’s request. 2) The request must be sent to the supplier within two months of delivery. Once the returns have been authorised, the goods must be accompanied by a delivery note indicating the details of the order. Goods must be returned carriage paid, in excellent condition Returns will only be accepted at the sole discretion of A Zeta Gomma Forniture Industriali Spa. In all cases in which returned goods are accepted, A Zeta Gomma Forniture Industriali Spa will issue a credit note to the value of the supplies, less 15% of the total by way of flat-rate reimbursement of expenses. PAYMENTS: - Methods of payment. Payments and other monies due to A Zeta Gomma Forniture Industriali Spa for any reason must be paid, net, in accordance with the agreed terms and sent to the supplier’s

domicile. Payments or direct remittances to agents, representatives or auxiliaries of A Zeta Gomma Forniture Industriali Spa will not be deemed received until such time as they are materially available to A Zeta Gomma Forniture Industriali Spa as agreed in the order. -Terms. Delays or irregularities in all or part of the agreed payment will entitle the supplier (after giving written notice) to suspend supplies or terminate pending contracts for new or different products, even if the payments relate to other sales. The right to compensation for damages is reserved Delays in payments caused by failure to comply with the agreed terms will automatically trigger the application of late payment interest (Italian Law 231/2002). Customers who have defaulted on payment may not make a claim against the supplier before having first paid all outstanding amounts in full. The supplier has the right of reimbursement in the case of any dispute or disagreement. There is no right of set-off against any

claims or demands of any kind made against A Zeta Gomma Forniture Industriali Spa RESERVATION OF TITLE: The delivered products will remain the property of A Zeta Gomma Forniture Industriali Spa until the price has been paid in full, in cases where all or part of the payment is to be made after delivery. In the case of a dispute and/or non-payment of even part of the price, A Zeta Gomma Forniture Industriali Spa may ask for the goods or products to be returned to its head office, by sending a written demand by registered post or certified email. The goods must be returned within 10 days from receipt of the request. GOVERNING LAW AND FORUM: The supply agreement is governed by the laws of Italy. The court with sole jurisdiction is the court in the place of domicile of A Zeta Gomma Forniture Industriali Spa, which may however take legal action in the courts of the buyer’s domicile. Sales Management 32 Why at the end of any way .there is always a result! Sede Via Radici in

Piano, 449/1 41049 Sassuolo (MO) - Italy Tel. +39 0536 867111 Fax +39 0536 806884 - 806945 Stabilimento Produttivo 1 Via S. Tommaso, 16/22 41049 Sassuolo (MO) - Italy Nuovo Villaggio Artigiano S. Carlo Stabilimento Produttivo 2 Via Trentino Alto Adige, 3 41049 Sassuolo (MO) - Italy www.azetagommacom info@azetagomma.com S.pA